Having an iPhone that won’t charge or turn on is frustrating. A glitch with the iPhone could make the iPhone behave so, thus, a fix is needed.
This article will provide you the various solutions you need to implement to regain your iPhone in good condition.
Part 1: Here’s what you need to do when your iPhone fails to charge
1. Check the charging accessories
Are the charging accessories you are using working? The charging accessories are what you need to check before anything else. Check if the socket is turned on. If yes, try to use a different socket to connect your charge.
If the socket is working well, try using a different USB cable to check if the cable is faulty. Replace the adapter too to see if it will charge using a different adapter. If this still doesn’t work, try to connect the iPhone to the computer using the cable to see if it connects. If this doesn’t work, try the next step.
2. Clean the charge port
Having checked and seen that the charging accessories are working, it’s time you ensure that the charging port is working too. The charging port may clog, hindering the iPhone from charging. Check if the port is well. If it is broken or damaged, you should take the iPhone for service. However, clean the charging port with a soft brush to remove dirt clogging the port if it’s not damaged.
3. Wait patiently
If you just plugged your iPhone, let it charge for 30 minutes before trying to restart it. If it doesn’t charge even after 30 minutes, try the next solution below.
4. Force restart
Force restart your iPhone and charge it.
For iPhone 8 or other later models: press then release the button for volume up and down at different times. Then, long-press the Side button, release when Apple’s logo appears.
For iPhone 7 or 7 Plus: long-press both the Side and button for volume down until Apple’s logo appears.
For iPhone 6s or other earlier models: long-press both the Home and Side button until Apple’s logo displays.
Check if the iPhone will start charging after the restart.
5. Put your phone into DFU Mode
Using DFU to fix the iPhone should be the last method you need to try, as your data will be wiped out. Thus you need to have a backup. To fix your iPhone using DFU mode, use the steps below.
1) Connect your iPhone with iTunes on computer
2) Enter DFU mode:
i. For iPhone 6S or earlier models: long press both the Home and Sleep buttons. After 8 seconds, release the Sleep button. Hold the iPhone’s Home button until the computer recognizes your iPhone.
ii. For iPhone 7 Plus or iPhone 7: Long press both the volume and Side buttons. After 8 seconds, release the Side button. Hold the iPhone’s volume button until the computer recognizes your iPhone.
iii. For iPhone 8 and above: Press the button for volume up, then release, do the same for the down volume button. Long-press the side button of the phone. Once you see a black screen, long-press the down volume button.
Long press these buttons but release the Side button after 5 seconds while holding the volume down button. Follow the on-screen instructions that will display.
3) When iTunes appears, click the restore then OK options.
4) Click Restore iPhone
Once your iPhone is restored, it should now start to charge normally.
Part 2: Here’s how to fix your iPhone not turning on
1. Diagnose the display
Your iPhone’s display may be damaged, making it not to show whether or not it’s on or off. Check your display and ensure it’s not the cause of the iPhone not turning on.
2. Restart your phone
Your iPhone may be failing to turn on due to services or various functionalities. To fix this, you need to restart your iPhone. Doing so will restart your services, and the iPhone will turn on normally.
3. Do a force restart
If your iPhone fails to restart normally, you need to force restart it. The steps to force restart your iPhone are as shown in method 4 of section 1 above. Force restarting your iPhone should fix the issue causing your iPhone not to turn on
4. Charge the iPhone
Is your iPhone charged? Go ahead and charge your iPhone, give it some time, like 30 minutes to charge, then try to power it on. If a low battery was what preventing it from turning on, it should now turn on normally. If not, still read for other methods from the article.
5. Hard reset iPhone
Your iPhone may have some software issues. Resetting the iPhone may fix this. However, note that your data will be lost if you don’t have a backup to restore the data. So, if you have an existing backup, you can proceed with this method.
To hard reset your iPhone, use either of the methods below depending on your iPhone.
For iPhone 8, 8 Plus, or X: press then release the button for volume up, then repeat for the down volume button. Long press the Side button, release when Apple’s logo appears.
For iPhone 7 Plus or 7: long-press both the Sleep button and that of volume down simultaneously. Only release when Apple’s logo displays.
For iPhone 6s or older models: long-press both the home and Sleep buttons simultaneously., release when Apple’s logo appears.
6. Fix the issue effectively and effortlessly
To fix your iPhone not turning on in a comprehensive, professional, and standard way, use Perfix tool. Perfix will not only fix your iPhone not turning on but also other issues such as low volume and repeated volumes. Perfix is an iOS repair tool. Thus it’s the professional tool you need to use for your iPhone problems.
The advantages of using Perfix are:
i. Unlike iTunes, it’s easy to use.
ii. Your data won’t be lost.
iii. Perfix is a standard tool for all iOS devices.
iv. Perfix will fix your iPhone even if it’s not operating.
To use Perfix, first, download it and install it on your computer, then follow the next steps below.
i. Open Perfix, connect your iPhone via a USB cable to your computer.
ii. Click “Repair Operating System”, then click “Repair Now”.
iii. Downloaded the needed firmware, then click “Start Repair”.
Once the process finishes, your iPhone should now be able to turn on normally without any issues.
7. Update your phone via iTunes
With iTunes, you can update your iPhone without losing data and hopefully fix your iPhone not turning on. Follow the steps below.
1) Connect your iPhone to the computer and open iTunes.
2) Click on your iPhone, then follow these steps:
If using iPhone 8 or later models: press and release the button for volume up and volume down at different times. Then, long-press the side button.
If using iPhone 7 Plus or 7: simultaneously long-press the Side and button for volume down.
If using iPhone 6s or earlier: long-press the side and home buttons simultaneously.
3) Hold the buttons depending on your iPhone model until recovery mode appears.
4) When prompted, choose “Update”.
The computer will then download the required firmware and updated the device. Your iPhone should be fixed once the process finishes.
8. Restore your iPhone into factory settings
You can also fix your iPhone not turning on by restoring the default factory settings of the iPhone. However, you need to have a backup as this method will wipe out your iPhone’s data and settings.
To restore the iPhone, open Settings > General > Reset. Once the menu opens, click the option to “Reset all settings”. Your iPhone will be restored, and once done, it will be fixed.
9. Use DFU Mode
DFU mode will wipe out your data so, if you have a backup, go ahead and use DFU mode to fix the iPhone. The steps to use DFU mode are similar to those shown in section one. With the steps shown, your iPhone should work well once you restore and restart it.
iPhone is a smartphone; thus, it’s fragile. It can easily have a glitch or be damaged, making it not turn on or charge as it should. Having methods to fix your iPhone issues is an advantage.
This article gave you the advantage by introducing the various methods you can use to fix your iPhone not turning on or failing to charge. For an instant fix, the article recommends using the iOS repair tool, Perfix, which fixes your iPhone instantly and easily.