[No Data Loss] Fix iPad Stuck On Apple Logo Right Now

Bradley | Last Updated: Dec 22, 2021

Reporter for five years, interacted with individuals working in the technology industry.

  • If your iPad stuck on Apple logo with a bar underneath, then it means your iPad is being updated, all you have to do is wait for the update to be completed.
  • If your iPad stuck on Apple logo without a progress bar, then your iPad may have a software or hardware problem.
  • You can fix iPad stuck on Apple logo by restarting, force restart or restore.

Your iPad is suddenly stuck on Apple logo? Is this what you are facing now? Well, panic not, this happened to me last week too. In this article, I am going to show you how to solve it step by step.

First thing you’ll need to do now, is to confirm if the Apple logo has a bar underneath. If yes, there is nothing to worry about as it is just updating the software. All you have to do is plug your iPad in the outlet for the charging and wait for the update to be completed. Once done, you can use your iPad again.

However, if the bar does not appear with the logo and iOS updating is not the case, then your iPad definitely has a software issue. But there is no need to panic as you can also solve this issue without any technical background.

Here, I listed all the effective methods in detail, so you do not have to waste your time searching for the cause and its solution. Just go through the article till the end to find all the crucial details.

Why is my iPad stuck on the apple logo?

There can be multiple reasons why your iPad might be stuck on Apple logo. Identifying the issue helps you better in solving the problem. Here, I explained the reasons in detail so you can have a better understanding to move forward.


Have you ever used jailbreaking to remove some restrictions over your iPad? Well, jailbreaking is one of the most common reasons why iPads and other iOS devices act this way or misbehave sometimes. It might remove restrictions but can cause a lot of problems later.

Third-Party Software

Did you recently install third-party software from an untrusted source? If so, that may be the reason your iPad is stuck on Apple logo. Such software always glitches and causes problems. They also interfere while you update or upgrade your iPad. Third-party software might also breach your privacy.

Computer USB Port & Lightning Cable

When was the last time you checked your computer's USB ports and your devices for dust particles? Well, if you never cared to check, then the problem could be with these ports. The dust particles in ports are not letting you connect successfully. Also, have a close look at the lightning cable to see if it is not damaged and properly working.

iPad Hardware

Have you recently dropped your iPad? Or did you use it with wet or moist hands? If yes, the problem with your iPad is related to hardware. Hardware problems cannot be solved at home, especially if you do not have any technical or repairing background.

Out of all the methods I tried for software glitches causing the iPad Apple logo stuck, only four of them prove to be effective. I prepared a comparison table of all three methods so you can have a look at what suits you best.

Method Delete Data Estimated time Success Rate
iTunes Yes a few hours or more 40%
Restart and force restart No 30 minutes 40%
Mobitrix Perfix No (standard repair) 30 minutes 95%

While I was experimenting with my iPad to solve the problem, I tested out all the methods listed above; however, I will recommend you to go with Mobitrix Perfix because it solved my problem successfully in no time without any complexity. Besides this, I will explain the other methods later in the article in case you want to have a look.

How to fix iPad stuck on apple logo without data loss via Mobitrix Perfix?

Mobitrix Perfix is a professional software that solves most of the problems you face with iPhones, iPads, and other iOS devices. The software comes with the simplest interface, so anyone can use it, even without a technical background. Here are some of the advantages you can get with the Mobitrix Perfix.


  • It does not delete your data.
  • The steps are super-easy to follow.
  • The procedure comes with a success rate of 95% to 99%.
  • It only takes up to 30 minutes to solve any problem.


  1. Download and Install Mobitrix Perfix.
  2. Connect iPhone/iPad to Computer. And click on “Start” in the main menu.
  3. Start repairing.
Mobitrix Perfix Standard Repair - Select Standard Mode

Mobitrix Perfix’s standard repair will surely solve your issue of the iPad stuck on Apple logo. However, if the problem is bigger than you thought, then Mobitrix Perfix also offers an advanced repair.

I know, you may think Apple’s methods are the best, since they are more “official”. But honestly, it didn’t work for me if you asked my reviews about the Apple method. I had to look for alternatives, and that is when I found Mobitrix Perfix. If you still want to try it out, here are the details of Apple’s method.

Apple approach to solve iPad stuck on apple logo

If you encounter any problem, such as an iPad stuck on Apple logo, Apple recommends you to follow any of these two methods to solve the issue.

Method 1: Restart and force restart iPad when iPad won’t turn on

Most people will know the restarting trick. Restarting or force restarting your iPad might solve the problem you are stuck in. However, the method isn’t always effective, but you can give it a try as it works sometimes.


  • The method is easy and safe to use.
  • It does not cause you loss of data.


  • The method might not work every time.
  • Multiple forced restarts can lower the recycling price of your iPad.

Steps: Restart

Without home button

  1. Press and hold the power button till you see a slider
  2. Slide right to restart your iPad.

With home button

  1. Press and hold the home button and power button till you see a slider.
  2. Slide right to restart your iPad.

Steps: Force restart

If you can't restart your iPhone, or your iPhone is not responding, you can use Force Restart.

Without home button

  1. Press volume up and then volume down button.
  2. Keep holding the power button till your iPad restarts.

With home button

  1. Press and hold the power button and home button till you see the Apple logo.
  2. Wait for your iPad to restart.
ipad will not turn on or charge via force restart ipad

Restarting solves a lot of problems, but sometimes it also does not work. If you do not want to go for a professional tool, here is a local tool, iTunes, that might help you overcome this issue.

Method 2: Fix iPad stuck on apple logo via iTunes/Finder to update

One reason your iPad might be stuck on Apple logo is that the software needs an update. But now, with the iPad stuck, you can’t choose an update option. However, you can use iTunes to start the upgrading process.


  • The method is provided by Apple.
  • It is free and secure to use.


  • The method is not very easy to use.
  • The process is lengthy and takes time to process.
  • The interface is not very friendly to use.


If your iPad turns on but gets stuck during startup, here are the steps to solve that:

  1. Connect your iPad to the computer. If you have a Mac with macOS Catalina, launch the Finder. However, if you have macOS Mojave or earlier, go with iTunes.
  2. Locate the iPad on your computer or Mac.
  3. Enter the recovery mode to move forward by following these steps according to your iPad.

    With home button:Press and keep holding the home button and top button till the recovery screen appears on your iPad.

    Without home button
    1. Press the volume button closest to the top button
    2. Press the volume button farthest from the top button.
    3. Keep holding the top button till the recovery screen appears.

  4. ipad is connected with itunes via usb cable
  5. After the recovery screen loads properly, you will see a prompt to update or restore. Click on “Update” to start the system update.
  6. ipad stuck on apple logo using recovery mode

Before Mobitrix Perfix, I also tried using the iTunes method. I had to wait for a long time so that iTunes could process the method but it still failed because of the low success rate. I also had to repeat the steps because the iPad kept getting out of recovery mode, waiting for the software to download.

FAQs about "ipad stuck on apple logo"

The methods listed above will do your work. However, if you have some thoughts, I complied with some frequently asked questions to clear your concerns.

What is DFU mode?

one dfu mode

DFU is known as Device Firmware Upgrade, a recovery mode for repairing or restoring an iPhone or another iOS device if you have lost access, such as an iPad stuck on Apple logo. You can use DFU mode with iTunes or Finder to get through your iPhone or iPad to make changes.

What should I do if I have tried all of the above and still have not succeeded in repairing my iPad?

If the above methods do not work for you, then the problem is with the hardware. Solving hardware issues requires technical knowledge. In such a case, I recommend you go to the nearest Apple store. Before you rush to the store, book an appointment, so you do not have to wait in line.

How Do I Fix a Stuck Apple Logo Endless Reboot?

The reason behind a stuck apple logo endless reboot can be a third-party app installed from an untrusted source, causing the operating software to bug your iPad. If you have tried all the solutions above, and still haven’t fixed this issue, then the problem is with the hardware. Your device may be suffering from certain physical damage or liquid damage. For this, you must consult with the Apple store.


As we conclude, I hope you must have had a pleasant time while reading through the article. This might seem a bit difficult to you in the beginning, but if you keep all your focus here, I am sure you will not face any complexity.

Whether it is software malfunctioning or a failed update, the methods explained above will do the work. And you also do not need any technical background to follow the procedure. However, if your iPad is stuck on the Apple logo and you want to recover your iPad in minutes then go for the Mobitrix Perfix as it is the fastest method among all.